Kia Forte: Warning lights / Low Tire Pressure
Warning Light

This warning light illuminates:
- Once you set the ignition switch or
Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
- When one or more of your tires are
significantly underinflated.
❈For more details, refer to the “Tire
Pressure Monitoring System
(TMPS)” section in Chapter 6.
This warning light remains on after
blinking for approximately 60 seconds
or repeats blinking on and off at
intervals of approximately 3 seconds:
- When there is a malfunction with
the TPMS.
In this situation, have your vehicle
inspected by an authorized Kia
dealer as soon as possible.
❈For more details, refer to the “Tire
Pressure Monitoring System
(TMPS)” section in Chapter 6.
WARNING
- Low tire pressure
- Significantly low tire pressure
makes the vehicle unstable
and can contribute to loss of
vehicle control and increased
braking distances.
- Continued driving on tires with
low tire pressure can cause the
tires to overheat and fail, which
may cause an accident.
The TPMS cannot alert you to severe
and sudden tire damage caused by
external factors.
If you notice any vehicle instability,
immediately take your foot off the
accelerator pedal, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.
Low Fuel Level Warning
Light
This warning light illuminates:
When the fuel tank is nearly empty.
If the fuel tank is nearly empty:
Add fuel as soon as possible.
CAUTION - Low Fuel
Level
Dr ...
Door Ajar Warning
Light
This warning light illuminates:
When a door is not closed securely.
Trunk Open Warning
Light
This warning light illuminates:
When the trunk is not closed securely. ...
Other information:
Horn
To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.
To sound the horn, press the area
indicated by the horn symbol on your
steering wheel mainly (see illustration).
Heated steering wheel
With the ignition s ...
Ventilation
1.Set the mode to the position.
2.Set the air intake control to the outside
(fresh) air position.
3.Set the temperature control to the
desired position.
4.Set the fan speed control to the
desired speed.
Heating
1.Set the mode to the position.
2.Set the air intake control t ...