Kia Forte: Chassis / Tire (pressure & tread wear)
Repair procedures
1. |
Check the tire pressure.
Tire Pressure
Tire
|
Front
|
Rear
|
195/65 R15
|
230 kPa (33 psi)
|
230 kPa (33 psi)
|
205/55 R16
|
230 kPa (33 psi)
|
230 kPa (33 psi)
|
205/60 R16
|
230 kPa (33 psi)
|
230 kPa (33 psi)
|
225/45 R17
|
230 kPa (33 psi)
|
230 kPa (33 psi)
|
225/40 R18
|
240 kPa (35 psi)
|
240 kPa (35 psi)
|
|
Tire Rotation
Checking For Pull And Wander
If the steering pulls to one side, rotate the tires according to the following
wheel rotation procedure.
1. |
Rotate the front right and front left tires, and perform a road test
in order to confirm vehicle stability.

|
2. |
If the steering pulls to the opposite side, rotate the front and rear
tires, and perform a road test again.

|
3. |
If the steering continues to pull to one side, rotate the front right
and left tires again, and perform a road test.

|
4. |
If the steering continues to pull to the opposite side, replace the front
wheels with new ones.

|
Tire Wear
• |
Using tires and wheel other than the recommended sizes could
cause unusual handling characteristics and poor vehicle control,
resulting in a serious accident.
|
|
1. |
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.0630 in.)
|
|
2. |
If the remaining tread depth (A) is less than the limit, replace the
tire.
When the tread depth of the tires is less than 1.6 mm(0.0630
in), the wear indicators (B) will appear.
|

|
Repair procedures
Inspection
Visually check the loose mount bolt. ...
Other information:
Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.
WARNING - Reduced Visibility
Continuous use of the climate
control system in the recirculated
air position may allow
humidit ...
If engine doesn't turn over or
turns over slowly
1. If your vehicle has an Intelligent
Variable Transmission, be sure the
shift lever is in N (Neutral) or P
(Park) and the emergency brake is
set.
2. Check the battery connections to
be sure they are clean and tight.
3. Turn on the inte ...