Kia Forte: Rear Glass Defogger / Rear Glass Defogger Switch
Repair procedures
| 1. |
In the body electrical system, failure can be quickly diagnosed by using
the vehicle diagnostic system (KDS).
The diagnostic system (KDS) provides the following information.
| (1) |
Self diagnosis : Checking failure and code number (DTC).
|
| (2) |
Current data : Checking the system input/output data state.
|
| (3) |
Actuation test : Checking the system operation condition.
|
| (4) |
Additional function : Controlling other features including system
option setting and zero point adjustment.
|
|
| 2. |
Select the 'Car model' and the 'Integrated body control unit (IBU)' to
be checked in order to check the vehicle with the tester.
|
| 3. |
Select the 'Current Data' menu to search the current state of the input/output
data.
|
| 4. |
To forcibly actuate the input value of the module to be checked, select
option 'Actuation Test'
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the heater and A/C control unit.
(Refer to Heating, Ventilation, Air conditioning - "Heater & A/C Control
Unit")
|
| 1. |
Install in the reverse order of removal.
|
Repair procedures
Inspection
•
Wrap tin foil around the end of the voltmeter test lead to p ...
Components and components location
Components
[4DR]
1. Rear view camera
2. Trunk lid handle
3. AVN monitor
4. Steering angle sensor
...
Other information:
Components and components location
Component Location
1. Cowl cross bar assembly
Repair procedures
Replacement
Put on gloves to prevent hand injuries.
...
Repair procedures
Smart Key
Smart Key Code Saving
1.
Connect the VCIⅡ of KDS to the data link connector (16 pins) in driver
side crash pad lower panel, turn the power on KDS.
2.
Select the vehicle model and then do "Smart key code sa ...
Rear Glass Defogger Printed Heater
Rear View Monitor (RVM)